Dodge viper

Specifications
Engine
Number of Cylinders	10
Displacement	8.0 liters (488 cui. in.)
Horsepower	450 @ 5,200 rpm
Torque	490 lb-ft @ 3,700 rpm
Redline	6,000 rpm : 6,200 rpm fuel cut-off
Compression ratio	9.6:1
Design	90-degree V10, cast aluminum block, aluminum heads, aluminum oil pan, magnesium rocker covers, ,
	Forged steel crank w/ 6 main bearings.  4-bolt mains (cross bolted)
	Forged steel rods, cast aluminum pistons
Intake manifold	Aluminum, ram-tuned with dual plenums and dual throttle-bodies
Valve train	OHV, 20 valves, roller-type hydraulic lifters
Valve Size
Intake Valve diameter	1.92"
Exhaust Valve diameter	1.58"
Cam Specs
Intake Valve Lift	0.542"
Intake Value Duration	297 degrees
Exhaust Valve Lift	0.542"
Exhaust Valve Duration	305 degrees
Valve Overlap	60.0 degrees
Exhaust manifolds	Tubular stainless steel design
Exhaust system	Stainless steel with catalytic converter and resonator in door sills.  Single large muffler in the rear.
Fuel delivery	Sequential multi-point electronic featuring bottom-feed, high impedance injectors
Cooling System	Copper core radiator, dual-speed 17" electric fan, aluminum water pump and front-mounted air to oil cooler
Drivetrain
Transmission	T56 six-speed manual, fully synchronized, with aluminum housing
Gear ratios
1st Gear	2.66:1
2nd Gear	1.78:1
3rd Gear	1.30:1
4th Gear	1.00:1
5th Gear	0.74:1
6th Gear	0.50:1
Reverse	2.90:1
Overall Top Gear	1.54
Clutch	Hydraulic, single dry disc, 12.2 inch diameter
Differential	Dana 44 Clutch-type, limited-slip. Final drive 3.07:1
Wheels & Tires
Front wheel / tire size	10 inch x 18 inch, 6 lug  :  Weight 28.4lbs
Rear wheel / tire size	13 inch x 18 inch, 6 lug  :  Weight 32.3lbs
Front tire size	P275/35ZR18 - Michelin Pilot Sport C1  (Viper specific)
Rear tire size	P335/30ZR18 - Michelin Pilot Sport C1  (Viper specific)
Suspension
Front	Independent with unequal-length upper and lower cast aluminum control arms, coil-over-shock units
Rear	Independent with unequal-length upper and lower cast aluminum control arms with separate toe link, coil-over-shock units
Front stabilizer bar	27 mm / 1.06 in.
Rear stabilizer bar	22 mm / 0.86 in.
Shock absorbers	Koni Double-acting hydraulic, low-pressure, gas-charged, rebound adjustable
Steering
Type	Power-assisted rack-and-pinion
Ratio	16.7:1
Turns	2.4 (lock to lock)
Turning diameter	40.5 feet
Maximum turning angle	28 degrees
Brake System
Type	four-wheel, three-channel ABS with electronic brake distribution
Front discs	13 inch x 1.26 inch vented
Rear discs	13 inch x 0.87 inch vented
Front calipers	Dual opposed (4) pistons, fixed calipers
Rear calipers	Single-piston, 43 mm diameter
Brake Booster/Master Cylinder	Tandem diaphragm vacuum with a zero-lost-pedal-travel feature
Body & Frame Construction
Body	Resin transfer-molded (RTM) composite material with a sheet-molded compound (SMC) hood.  Features a full-access, forward-opening hood/fender assembly
Frame	Tubular space frame with center spine structure.  Fortified by a milled steel top and aluminum alloy bottom plate.
Static Torsional Rating	7,600 lb-ft
Static beaming rate	95,000 lb/inch
Dimensions
Wheelbase	96.2"
Overall length	176.7"
Overall width	75.7" (at rear wheel lip)
Overall height	48 "
Track, front	59.8"
Track, rear	60.9"
Ground clearance	5" stated.  4" to bottom of front air dam.
Curb weight	3,460 lbs
Weight distribution	48/52
Capacities
Fuel tank	18.5 gal
Crankcase	10 qt. total capacity including filter.
Cooling system	12.8 qt.
Transmission	4.1 qt.
Differential	46 oz.
Performance
0-60mph	4.0  - 4.2 sec
0-100 mph	8.9 sec
1/4 mile:	12.2 sec @ 118mph typical.  Fastest known magazine recorded stock time is 11.77 sec.
Top Speed	186 - 192 mph
0-100-0 mph	13.2 sec
0-150-0 mph	31.6 sec
Lateral Acceleration	0.98
Braking	122 ft.
Slalom Speed	72.4 mph
Gas Mileage City/Highway	11/21